GAME CENTER FOLDING INSTRUCTIONS
To make folding sequence easier treat unit as two separate boxes.
Step 1 Collapsing Box 1

Take the front box with both hands on either side and fold the right front corner diagonally into the left (opposite) corner.
The front box should resemble an "L". Take the left front and fold it toward the right. This will leave front box collapsed and the rear box intact.

Step 2 Collapsing Box 2

Repeat Step 1 with the rear box. Start with the left front corner, folding diagonally into the right corner (opposite) until all panels are flat. Make sure the basketball hoop on the back panel is facing you.

Sometimes the nylon top of the unit binds the corners and makes it difficult for the box flap to lie flush. Pull the nylon out so that the unit nests flat. At this point the unit could be stored under a bed, couch or behind a door.
Step 3 Twisting and Folding

Take the flat, collapsed unit and hold it with the basketball hoop on the back panel facing you. Your hands should be on opposite sides of the unit just above the radius. In a motion similar to fanning, wave the unit up and down. During the downward motion bring your hands in toward each other creating a taco shell shape. In the same motion, twist your wrists in so that your thumbs are pointing toward each other and bring your right hand slightly over your left. The back (basketball hoop) panel hangs down and should be gathered from underneath by pushing it into your knees or the floor. The collapsed unit should now have 3 loops (one larger). Push unit into the carrying case, while rotating the unit until it fits into the bag. The loops will not be of equal length, but will fit into the bag.